Fishing gear has many small points, but it works with big things. One of them is a swivel. It is a small device attached to the rod, and its job is to connect two different fishing-sized fishing lines. So you can tie knots that are connected to the swivel to a mainline.
Swivel is an essential thing as it connects the leader and mainlines together. Also, the swivel prevents line twisting when you are using artificial lures. The swivel has two rings on both sides that help to attach the leader to a rig.
The hook length should be matched with the rig body. You can easily spin and twist the ring when the line is twisting. Using swivel is a critical technique, but when you know how to tie a leader to it, you can easily connect any type of knots with it.
How to Tie a Leader to a Swivel – Basic Steps
Tying a leader is something that can be done in different ways. Where different knots have different uses with the fishing line, some basic knots are used everywhere.
Step by Step Guides for Tying a Leader
If you are looking for the simplest way to tie a leader, then here is what I would recommend:
- A swivel is tiny, so hold it with your finger in one hand and hold the leader material with your other hand.
- Insert the leader into the swivel ring and run it. Wrap the line at least 6 to 8 times to your middle finger and remove the finger.
- This will create a loop knot. After making the loop, hold the tag end of the line and insert it into the circle and twist it once again.
- After that, hold the tag and run it back to the loop so it can go around to it. Use any moisten to check if it is cinched down.
- Pull the line end slowly and overlap it. You can tie other types of knots, such as a simple knot.
- Hold the line straight and fold it, then slowly insert it into the swivel ring and keep it at least 4 inches long, so the line makes a loop at the end.
- Now fold the line again, and it will create a big round hole. Now tie the line with both ends properly.
- You need then to push the swivel in the right direction.
This will make a basic knot at the end of the ring. Tighten the knot and cut off the extra line with a session.
Palomar Knot for Tying a Swivel to Your Fishing Line
First of all, double up the main line and make a little loop so you can put it through the swivel ring. Hold the double line with your two hands, then hold the end of the line and you will see the swivel is hanging on it.
Now make a simple overhand knot and slowly run it through the swivel. It will make a loop at the end of the line. Pull the line slowly and tighten it.
Offshore Swivel Knot
The offshore swivel knot is one of the most vastly used fishing knots used in offshore fishing. Again, fold the line and insert it through the swivel ring. It will make a loop in one end. Keep the swivel at the middle of the line and twist the loop.
The twisted loop should be above the swivel and fold the line. Keep the swivel in one place of the line by putting your finger on it. This will create an Improved Clinch Knot.
The swivel will fit inside the loophole. Now spin the swivel at least 6 times to create a coil. The coil has two straight lines at the end. Hold the line and pull it slowly, and it will make an Improved Clinch Knot – a tight one.
Where to Keep the Swivel in Fishing Knots
It is best to keep the swivel at the top of the leader. Please keep it away from the hook so the swivel will say on the line. This way, the line will be safe from twisting.
The fish won’t get scar because of it. You can use one or more swivel, but that depends on the situation. Sometimes a single swivel is enough for the rig.
What is the Best Knot to Tie on a Swivel?
The best knot to tie on a swivel is the Palomar knot, Trilene knot, nanofilm knot, etc.
If you can attach the knot correctly with different hooks, it can make a great addition to improve your fishing experience.
How Do You Tie a Fluorocarbon Leader to Swivel?
You need to understand some essential thing to tie a loop to a swivel. For knot tying the fluorocarbon line to swivel strongly, you should follow the basic principle. Every artificial lure has a hook at its mouth.
So, how to attach a lure to a swivel on the fishing line?
Take the line and insert it through the hook and pinch the line to make a tagline. After that, wrap the tagline over the mainline at least 7 times then you will get a small tagline at the end.
Now hold the tagline and make a little loop. Insert the tagline through the loop and slack it up. Please hold the line with one hand and pinch it. Hold the tagline with the other hand so the mainline and tagline will be connected.
Slowly pull the line and make it tight. Keep the tagline away from the lure so the lure will get a knot. Do not forget to cut the tagline.
How Do You Tie the Swivel to a Lure?
Tied up the line directly to the swivel ring and make it tight with pliers. The lure has a clip on its head. Lose the clip with pliers, then attach the swivel on it. So, the swivel will hold the lures.
When you are fishing from the pontoon fishing boats using the trolling motor, you should make the tie with the fishing line hard enough because there will be added speed.
How to Tie a Quick-Change Swivel
Quick change swivel makes a quick-change connection that helps to change the loop to the connection easily. This kind of fishing knot options a good way for game fishing. Quick change swivel also has two rings, but one of the rings is not the same as the others.
Tying the quick-change swivel is a lot easier than regular swivel. Just tie the line to the swivel and make a loop. Slowly pull the line with your finger and make a tight knot.
How to Attach a Snap Swivel
Snap swivel minimizes the line twisting so the lure won’t be tangled when the fish strikes. It also has two eyelets that connect.
You can compare it with safety pins. Just open the snap so you can attach your tackle to it. It has ball bearings, so this swivel rotates much smoothly.
Leave a Reply